PEMP Store

PEMP E60 Aux Adapter Open The Aux Audio of The Original Car for BMW E60 E61 E63 E64 CCC 2003-2010 (Note The Step 4)

$79.00
$79.00
$89.00
Frais de port calculés à la caisse.
  1. Step 1: Please watch the 2 videos on how to activate and install the 3 wire terminals, paying special attention to the important tips in step 4! Otherwise you can't get the AUX AUDIO menu and sound.
  2. Step 2: Remove the original car's display screen, and connect the wires as shown in the figure; Start the car and place the original car display on the Entertainment interface;Press and hold the button for more than three seconds until the indicator light turns on; release the button to start activation Process.
  3. Step 3: After the activation process is over, check the original car entertainment interface, AUX Audio shows that it has been activated; keep it connected!
  4. Step4: (important )!! After activation, keep connected, wait for 5 seconds, then turn off and lock the car and let it sleep for 15 minutes. Disconnect the negative pole of the car battery for another 1 minute and then connect it back. Then get on the car and check the aux audio was display, if the aux audio also display. It has stored your AUX AUDIO menu.
  5. Step5: You can buy the Bluetooth aux of pemp get the phone's sound via bluetooth. You still can buy PEMP Android Screen with confidence, . You will get the Sound of PEMP android.
Pay in installment: $661 /mth
Learn more
Payment
MastercardVisaAmerican Express PayPalMaestroKlarnaJCBDiscover

  1. Compatible Devices Cellular Phones
  2. Specific Uses For Product Cell Phone
  3. Connector Type Auxiliary
  4. Color BLACK
  5. Item dimensions L x W x H 2.44 x 1.22 x 0.47 inches

1-Year Warranty
In stock! Ships within 1-2 business days.
Respond to questions within 12 hours.
Return to your nearest address. (USA and Europe)
Activation IMPORTANT TIP

(important tip):After activation, keep connected, wait for 5 seconds, then turn off and lock the car and let it sleep for 15 minutes. Disconnect the negative pole of the car battery for another 1 minute and then connect it back. Then get on the car and install other steps!

Read More
Please activate the AUX menu before installing the Android screen to be effective.

If you have an Android screen installed, Please remove the Android screen and wiring harness. Leave it in the same state as before installation. Activate the AUX menu first. Then reinstall the Android screen. Otherwise you will not get the AUX menu.

Read More
Note:

After this product successfully activates the original car's AUX function, no other vehicles can be activated.

Product function:

1. Use the easiest way to quickly activate the AUX audio input of the original car, and then input your mobile phone music into the car.

2. Your original car does not have AUX audio input, you must activate it to install the purchased Android navigation, otherwise there will be no sound on Android.

3. After successfully activating the original car AUX, it is only valid for this car, and it can no longer be used to activate other cars.

4. One-key operation and automatic activation;

5. The product is only applicable to original BMW CCC cars without AUX;

Parts List

a. Activator X1;

b. Connection line X1;

c. Audio line with terminal X1;

d. Audio cable X1

e.Wire terminal block X1

Read More

Product Video

How to install BMW E60 Aux Adapter

Product Installation and Setup

Approaches to common problems
Installation text

if you want get the phone's sound via bluetooth, you can buy below PEMP bluetooth aux BOX

When your get the OEM aux menu, if you want get the phone's sound via bluetooth , you can buy the ASIN: B0BBF973NP Step 1. Connect the 3.5mm headphone plug male connector to the activator female connector; Step 2. Open the OEM aux menu; Step 3. Connect the phone Bluetooth according to the Bluetooth AUX box ASIN: B0BBF973NP instructions, you can get the sound of your phone.

Activator Indicator Status Description

A. The indicator light blinks once a second to indicate that activation of the AUX function is active and not in use. B. The indicator light is always on, indicating that activation is in progress. C. The indicator light flashes rapidly, three times per second, indicating that the activator is disabled. It can no longer be used.

How to connect the red, white and black terminals of the E60 activator?

* If you're going to install an Android screen, make sure you don't install these three red, white and black wires! Steps in connecting the red, white and black three wire terminals: 1- Take the big plug of the OEM ISO out of the back of the radio; 2- Take the 1st socket out of the big ISO plug; 3- Take the 2nd socket out of the 1st socket; 4- Insert the red, white and black terminals into the second socket; 5- Return the second socket and the first socket to the large ISO socket; 6- Plug the big ISO socket back into the back of the OEM radio; This way you can get the sound of AUX.

You May Also Like

IN THE BOX

Frequently Asked Questions

Pre-Sales FAQ

Answer your pre-sales questions
After-Sales FAQ

Answer your pre-sales questions