PEMP (9533) for BMW X3 F25 X4 F26 EVO ID5 ID6 Wired and Wireless Apple CarPlay Retrofit Android Auto 8.8" Screen (2013-2016)

Wireless and wired Carplay for bmw F25 F26 EVO
Built-in wireless and wired Carplay, Wired CarPlay need connect the USB IN 1.

Wireless and wired android auto for bmw F25 F26 EVO
Built-in Wireless and Wired android auto, Wired Android auto need connect the USB IN 1.

Wired and wireless Mirror link for bmw F25 F26 EVO
Built-in Wired and wireless Mirror link, Wired Mirror link need connect the USB IN 1.

Linux screen reverse camera wiring method

Linux on-screen reversing camera Support 720P AHD format

Linux screen front view camera wiring method

The Linux front view camera supports 720P AHD format.

If you want to use both front and rear view camera at the same time, you need to use the one-point-two “CAMERA +12V” wire harness that comes with the front view camera.

Solution for sound distortion, Linux screen without 4G and GPS.
1. If Carplay or Android auto sound is distorted after installing the PEMP screen, you will need to connect plugs GROUND A and GROUND B.

2. Linux screen does not have 4G and GPS, so it does not come with these two accessories.

Use the OEM Bluetooth to Calling in CarPlay Android auto
If your car has the OEM Bluetooth, Please use the original Bluetooth to make calls when using CarPlay and Android Auto. No echo and high quality sound.

NOTE: This connection can only be used to get music sound when your vehicle has Bluetooth audio capability.

How to get sound using raw bluetooth, search on YouTube: gKqeUAbMyCs

Need use the USB IN1 Connect the Wired Function
Be sure to use USB IN 1 to connect the wired CarPlay Android auto and Mirror link function.

Set the OEM Resolution
Please select the correct resolution for the OEM display within the settings, otherwise the OEM Car INFO may not display properly.

Setup>Car Settings> Original Car's Screen Resolution> Select the item

Support the OEM or after-market Camera
Please select the correct camera option within Settings, Select Original Camera if it is a factory camera. Select Aftermarket Camera, if you are installing an aftermarket camera.

Move the original host fiber optic cable to the new harness
If your OEM radio has a fiber optic cable above the power harness, Pls move it to the new harness. Otherwise you can't get the car information and the Linux CarPlay sound. And it will be accompanied by a heartbeat wheezing sound.

How to install F30 Linux Screen

https://youtu.be/u_TXzGYHRHY?si=lKrQaqny01bUhTpf

Introduction to PEMP Linux Screen Settings

https://youtu.be/q0AJrV49NLU?si=a31EEAeUGLACSF3T