PEMP Store

PEMP (8003) AHD Rear Camera Parking Rear View Camera for BMW E60 E70 E90 E87 Android Linux Screen (AHD 110 * 40)

$69.00
$69.00
$89.00
Shipping calculated at checkout.
  1. Special note: It is not suitable for your original car display. If your display does not support AHD input interface, it cannot be displayed! So it only supports rear display with 1080P 30FPS AHD input/720P 25FPSAHD input.
  2. It supports all resolutions of PEMP Android、Linux display
  3. It is only suitable for BMW E60 E61 E70 E71 E90 E87 dedicated rear-view camera, other models you cannot install.
  4. HD AHD camera with maximum 1920*1080/7920*720 resolution. Please make sure your display can support 1080P 30FPS/720P 25FPS format input, otherwise it only has black and white image.
  5. Camera width up to 120 degrees, HD night vision effect.
Camera:
Pay in installment: $661 /mth
Learn more
Payment
MastercardVisaAmerican Express PayPalMaestroKlarnaJCBDiscover

  1. Brand PEMP
  2. Lux rating 0.1 Lux
  3. Compatible Devices Monitor
  4. Installation Type Flush Mount
  5. Video Capture Resolution 1080p/480P
  6. Voltage 12 Volts
  7. Optical Sensor Technology CMOS
  8. Effective Still Resolution 2073600 Pixels/7.2E+2 Pixels
  9. Lens Typem Wide Angle
  10. Real Angle of View 120 Degrees

1-Year Warranty
In stock! Ships within 1-2 business days.
Respond to questions within 12 hours.
Return to your nearest address. (USA and Europe)
Manual Transmission back Camera settings

If your car is a manual transmission, you need to select gear type2 or 3 in the setting(PEMP Android screen) ; The setting method is as follows:

Settings> factory>pass word070305> vehicle> Gear Selection, pls select type2 or 3

Then reverse the vehicle, and the reversing screen will be displayed normally.

Read More
How to connect the Carmea wires?

1. Please connect the REAR camera's yellow video cable to the PEMP Android harness with the Rear Camera IN.

2. Please connect the red power cable of the camera to the PEMP Android wiring harness marked with Carmera +12V;

3. Do not connect any other wires.

4. When you are reversing, the Android interface will automatically switch the reversing screen, Carmera +12V starts to supply power to the camera, and you can see the reversing picture on the screen.

Notice:

1. If you purchased the PEMP front camera, you need to connect the power of the front camera with the Camera +12V. And connect the yellow video cable of front view camera with FF Camera in.

2. PEMP Android screen, the 8.8-inch display only supports CVBS camera input; the 10.25-inch display supports AHD and CVBS reversing cameras.

Read More

You May Also Like

IN THE BOX

Frequently Asked Questions

Pre-Sales FAQ

Answer your pre-sales questions
After-Sales FAQ

Answer your pre-sales questions