1.Pre-Operation Preparation
1.1.Hardware Preparation
A USB flash drive with a capacity of less than 32GB and formatted to the FAT32 file system is required.
1.2.Material Preparation
1. Prepare the replacement boot logo assets. The image resolution must be 1920×720 pixels, and the file format must be PNG.
2. Rename the processed image file to updatelogo
2.Operational Procedure
Step 1: Copy the renamed updatelogo file to the root directory of the prepared FAT32-formatted USB drive.
Step 2:Insert the USB drive into the USB port on the Mercedes-Benz Linux screen.
Step 3: Wait for the device to automatically recognize and load the identification file. Once the update prompt appears on the screen, restart the device.
Step 4: After the device restarts, remove the USB drive. The startup logo has been successfully replaced.
3.Important Notes
1.The USB drive capacity and file system format must strictly comply with requirements; otherwise, the device will be unable to recognize the media, resulting in operation failure.
2. Asset resolution and format must comply with the 1920×720 pixel PNG standard.
3. Image file names must be formatted as (updatelogo).
4.After-Sales Support
If you have followed the above steps but still encounter issues with replacing the startup logo or receive error messages, please promptly contact our professional after-sales service team for technical support and further diagnostic assistance.
(After-sales email:service@pempcar.com)
