This document will guide you through the process of manually updating the firmware and interface of your in-vehicle Android infotainment system using a USB drive.
1.Preparations
1.Prepare a USB flash drive formatted in FAT32 with a capacity of no more than 32 GB.
2.Contact the PEMP after-sales team to obtain the latest system update package (after-sales email: service@pempcar.com).
3.Make sure the vehicle is parked and the power is on (we recommend starting the engine to prevent the update from being interrupted by a power loss).
2.Update Process
1.Preparing to upgrade the USB drive
Copy the system update package you downloaded (be sure not to unzip it) directly to the root directory of the USB drive (do not place it in any subfolders).
2.Connect a USB flash drive
Insert the prepared USB flash drive into the USB port on the in-car Linux screen.
3.System Update
When the upgrade prompt appears on the screen, confirm the upgrade.
4.Update complete
4.1 Please wait for the update to finish. Do not turn off the device or remove the USB flash drive during this process.
4.2 When the update is successful, the screen will automatically restart. At this point, please remove the USB flash drive.
4.3 System update successful.
3.Important Notice
1.Do not interrupt the update: Do not disconnect the power or remove the USB drive while the update is in progress.
2.File location: Make sure the update package is located in the root directory of the USB drive; otherwise, the system will not be able to detect the update.
3.Format Check: If the system cannot recognize the USB drive, please check whether it is formatted as FAT32 or exceeds 32 GB in capacity.
If the update fails multiple times, please contact the PEMP After-Sales Team for technical support.
After-sales email:service@pempcar.com)
